Fiber Management Systems

[full_width]Cablcon offers a wide variety of fiber optic cable management systems supporting DAS, small cell, CEV/hut and data center solutions, as well as traditional Central Office applications. Offering flexibility and scalability, you can rely on the quality and performance of our products, which are domestically manufactured in one of our ISO & TL 9000 certified facilities. In addition to the products offered below, Cablcon has a team of engineers ready to support you with custom solutions designed to meet your needs. [/full_width] [full_width]

Rack Mount Distribution and Patch Panels

[one_sixth]Rack Mount Distribution & Patch Panel[/one_sixth][five_sixth_last]

Cablcon’s 1RU, 2RU and 4RU rack mount panels provide flexibility to accommodate a variety of network applications. Whether your application requires termination patch, splice, or both, our panels can be configured to meet your requirements.

Distribution Panel Brochure Patch Panel Brochure[/five_sixth_last] [/full_width] [full_width]

Wall Mount Distribution and Patch Panels

[one_sixth]Wall Mount Distribution & Patch Panel[/one_sixth][five_sixth_last]

Cablcon wall mount panels are available in a variety of sizes, supporting 6 to 96 fibers:

  • 6-12 fiber capacity – 7”W x 1.5”D x 6.5”H
  • 12-24 fiber capacity – 15.625”W x 2.125”D x 13”H
  • 24-48 fiber capacity – 15.625”W x 3.5”D x 15”H
  • 48-96 fiber capacity – 12.25”W x 6”D x 17”H

Our wall mount panels include dual cable entry/exit ports on both the top and bottom of the panel, fiber management D ring hardware, and are built of heavy gauge, robust, powder coated steel for durability.

Distribution Panel Brochure Patch Panel Brochure[/five_sixth_last] [/full_width] [full_width]

CPRI Interface Test Panels


Cablcon CPRI Interface Test Panels are installed between the Optical CPRI BBU and the RRH, allowing carriers to view and troubleshoot RF interference within the uplink Rx spectrum. Our test panels provide non-service affecting monitor ports, where a protocol analyzer can be used to decode the transmit data stream from an active antenna. Test ports are located on the front, with the RRH and BBU ports on the rear, allowing for hybrid cable storage.

Universal High Density CPRI Module Rectangular Slack Management CPRI Module Front Facing CPRI T Module[/five_sixth_last] [/full_width] [full_width]

Variable Fiber Management (VFM®) Rack Mount, Wall Mount and Head End Solutions

[one_sixth]Variable Fiber Management[/one_sixth][five_sixth_last]

Cablcon’s VFM® solutions combine fiber cable in counts up to 48 fibers with fiber panels using our unique and innovative fiber delivery system. VFM® provides a cost effective and efficient way to install fiber by reducing engineering, ordering and installation time. Fiber is installed faster than traditional methods while delivering a superior performance cable plant. Applications range from DAS & cell sites, data centers and central offices, to customer premise installations.

In-Building Rack Mount Variable Fiber-Length Management System In-Building Wall Mount Variable Fiber-Length Management System In-Building Rack Mount Head End Panels for VFM®[/five_sixth_last] [/full_width] [full_width]

LGX-Style Adapter Plates

[one_sixth]LGX Style Cables[/one_sixth][five_sixth_last]

Cablcon carries numerous LGX-style adapter plates to meet your fiber management connectivity requirements. The adapter plates are made to fit all Cablcon fiber management solutions, including rack mount and wall mount pigtail and splice panels, as well as our Variable Fiber Management systems. Supporting simplex and duplex LC, SC, ST, and FC, and quad LC for high density solutions, we have the solution that meets your needs.

Product Brochure[/five_sixth_last] [/full_width] [full_width]

Fiber Optic Cleaning Products

[one_sixth]Fiber Optic Cleaning Products[/one_sixth][five_sixth_last]

A clean connection is a requirement for maintaining an error-free fiber optic network. Dust, lint, oil or other foreign particles may obscure an end face, compromising the integrity of the optical signal. Cablcon is pleased to offer Senko products to support your fiber optic cleaning needs.

Product Brochure[/five_sixth_last][/full_width] [full_width]

Cablcon Web Based Fiber Optic Test Reports

[one_sixth]Web Based Reports[/one_sixth][five_sixth_last]

In an effort to better support the industry and be more environmentally responsible, Cablcon provides assembly test results online, rather than send paper printouts with assembly shipments. Electronic test results are available online at for each order and are archived at Cablcon for warranty purposes. Custom test reports are also available.

Product Brochure[/five_sixth_last][/full_width]